Drone Cave

August 24, 2012

0

Yes, I use a sea container as a cave for GuerrillaDrone. Normally the universities and laboratories that experiment with drones have enough money for have big empty spaces with visual tracking systems where put their drones. I use the sea containers of mobi studios as safe area for test GuerrillaDrone and keep the rest of […]

Posted in: meta

Safe & Safety

August 11, 2012

1

Safety is important. When I started working with quad copters and I began see some people with deeps cuts in their hands a cause of the propellers I realized that this is the only accident that can happen, and some crashes of corse. Normally the multi copters uses Lipo Batteries, if the Lithium contact the […]

Posted in: meta

Close to the sky

July 31, 2012

7

After some shortcircuits, motor reparations and other stuff, the prototype of GuerrillaDrone is almost ready to fly.

Posted in: meta

Hacked radio

July 23, 2012

0

The FRSky / Turnigy radio controller is born to be hacked. In fact, the radio comes from a hacked world. A group of China factory’s produce this radio for less of 80$, with the same quality like a expensive radio for 500$ All radios like Turnigy 9X, FlySky 9X, FrSky 9X, Eurgle 9X, are in […]

Posted in: buildlog

Drones Libres

July 8, 2012

0

The first time that I listen the word Drone was few years ago developping the project of Massive Comprehension Machine with my collegues of hackitectura.net  in the process of developping the cartographies and video of Cartografiando Gaza. The Gaza strip was the first time to one govenment uses drones to surveillance civilians. In the aim […]

Posted in: meta

Spider of power

July 5, 2012

0

The Power Distribution Board  (PDB) is one of your bests friends if you want to wire all the motors and keep the wiring of your multicopter clean. GuerrillaDrone is a Y6 copter, and uses the PDB of a Hexacopter from 3DRobotics. I call it the “Spider of power” because, like the spiders uses the arms […]

Posted in: buildlog

Complexity

June 23, 2012

0

This are the parts (not all) that composes the GuerrillaDrone: APM 2.0 Purple with MediaTek MT3329 10Hz – HMC5883L 3 Axis Magnetometer 6 motors AC2836-358, 880Kv 6 ArduCopter ESC 20 Amp 3 Propellers, 10X45 EPP Style 3 Propellers, 12X45 EPP Style Hexacopter Power Distribution Board 3DR RadioTelemetry Kit-433Mhz Antenna 433MHz RP-SMA 2dBi MB1200 XL-MaxSonar-EZ0 High […]

Posted in: meta

GuerrillaDrone in Night of Art and Science

June 16, 2012

0

The past 2 June I was invited by NP3 to produce some artwork for the Night of Art and Science in Groningen and show some of the ideas that are inspiring the project GuerrillaDrone. Finally I decided to work about surveillance, omni-vision and the full airspace that are coming next years. For show this I […]

Posted in: meta

Camera mount for camera & projection

June 12, 2012

2

Guerrilla Drone uses a camera mount (or camera gimpball) in 2 axis for stabilize the video input from the camera and projection. I buyed here and asembled myself. This is the final result: Some details about the roll: And pitch: With AutoPilotMega 2 is really easy to use: plug & fly.

Posted in: meta

GuerrillaDrone project exhibition in Barcelona

June 12, 2012

0

Finally GuerrillaDrone is not the winner of the awards Miquel Casablancas from Sant Andreu Contemporani. But if you want to see the project & the rest of finalist you can go to Fabra i Coats in Barcelona. Only this week.

Posted in: Uncategorized